Before

After

We Work in Walls

When circumstances will not allow you to open the walls for drying the wet areas behind the sheet rock, specialty equipment must be brought in. This commercial building was affected by water, we were unable to open the sheet rock to dry within the cavity of the walls.  In this case we extracted the glue down carpet and removed the rubber base cove. The carpet will be cleaned once the entire area is dry and the rubber cove base will be replaced with new.  We then drilled small holes in area of the removed cove base to insert the drying system. Inserting this system will allow us to dry the wall cavity.  This process normally does take longer to reach dry standards however the reconstruction time is very minimal. The rubber cove base can be glued back in place over top the holes entered in the sheet rock.